Safety valves 09

Process Technology
Products & Solutions
aha INOVA | Fittings and Valves
Safety valves 09

Safety valves, type 325xx / 326xx

The cost-effective type series features a highly distinctive cylindrical housing. These safety valves can be used in vertical or horizontal positions and are especially suitable for pressure protection of smaller containers.

Handtmann safety valves

Spring-loaded, hygienic safety valve
Approval for different fluids - liquids (F), gases (G) and steams (D)
Design in accordance with the Pressure Equipment Directive (Cat. IV), CE and EAC conform
Design in accordance with AD 2000, bulletin A2
Individual testing with setting test certificate

TOP equipment

Lifting, manual or pneumatic
Optionally with proximity switch, heating cartridges
Optionally autoclavable top part

Technical Documentation

DE | Operating Manual Safety Valve 32500-32504, 32524, 32603, 32604, 32624, 32010

EN | Operating Manual Safety Valve 32500-32504, 32524, 32603, 32604, 32624, 32010

ES | Operating Manual Safety Valve 32500-32504, 32524, 32603, 32604, 32624, 32010

FR | Operating Manual Safety Valve 32500-32504, 32524, 32603, 32604, 32624, 32010

Safety valves, type 335xx / 336xx

Safety valves are predominantly used in critical areas (overpressure). The design therefore requires the greatest care. Handtmann offers you tested quality for safe processes. These safety valves can be used in vertical or horizontal positions.

Handtmann safety valves

Spring-loaded, hygienic safety valve
Approval for all three fluids - liquids (F), gases (G) and steams (D)
Design in accordance with the Pressure Equipment Directive (Cat. IV), CE and EAC conform
Design in accordance with AD 200, bulletin A2
Individual testing with setting test certificate

TOP equipment

Hygienically designed product area
Optimised design for high blow-off capacity
Divided valve disc, defined seal compression
Lifting, manual or pneumatic
Optionally with proximity switch, heating cartridges
Minimal dead space design type 33503

Technical Documentation

DE | Operating Manual Safety Valve 33501, 33503, 33601,033603

EN | Operating Manual Safety Valve 33501, 33503, 33601,033603

ES | Operating Manual Safety Valve 33501, 33503, 33601,033603

FR | Operating Manual Safety Valve 33501, 33503, 33601,033603

ASME safety valves, type 33551 / 33561

Handtmann is a certified manufacturer of hygienic safety valves made of stainless steel. With regard to design, performance and quality the new types 33551/33561 comply with the ASME Code. ASME safety valves are for use in hygienic areas of the food and beverage industry as well as the chemical-pharmaceutical industry intended.

Handtmann safety valves

Spring-loaded, hygienic safety valve
Approval for liquids (F) and gases (G)
Full-lifting safety valve in accordance with ASME Code Section Vlll
Division I / UV Stamp certificated
Individual testing with seting test certificate

TOP equipment

Hygienically designed product area
Optimised design for high blow-off capacity
Divided valve disc, defined seal compression
Lifting, manual or pneumatic
Optionally with proximity switch, heating cartridges

Technical Documentation

DE | Operating Manual ASME Safety Valve 33551, 33651

EN | Operating Manual ASME Safety Valve 33551, 33651

Safety valve, type 32010

This valve type is specially designed for overfill protection of large containers and can be installed as a single valve or in combination with a tank dome cap. These safety valves can only be used in the upright (vertical) position. The sophisticated construction allows safe, hygienic operation.

Handtmann safety valves

Weight-loaded safety valve
Approval for liquids (F)
Design in accordance with the Pressure Equipment Directive (Cat. IV), CE and EAC conform
Design in accordance with AD 2000, bulletin A2
Individual testing with setting test certificate

TOP equipment